Test Equipment
Elastomer Test System
[ELASTOMER TEST SYSTEM (1,000Hz, MTS)]
The 831.50 was developed for tests of material properties as well as components such as engine mounts, bushings, transmission mounts, and other vibration damping and control elements. Test Limit: Weight 1,000kgf
Frequency Range: 0.01 to 1,000 Hz,
with +/-10 kN force and displacements of +/-20 mm.
Rubber Static & Fatigue Tester
[RUBBER STATIC & FATIGUE TESTER(3TON)]
For testing Weight Resistance.
Under the simulated Up-Down exercising, it is tested
Strain(Deformation) degree.
Test Limit : Weight - 20,000kgf
Degree of Angle - ±15°
HZ - 2.5 HZ
Rubber Torsion & Fatigue Tester
[RUBBER TORSION FATIGUE TESTER (2TON)]
For testing the Endurance from the twist pressure.
By twisting the good with the specific regular weight, it is tested
good's Endurance and Abrasion degree.
Test Limit : Weight - 2,000kgf
Degree of Angle - Max 45°
HZ - 2 HZ
Rubber Adhesive Tester
[RUBBER ADHESIVE TESTER (20TON)]
For testing the Adhesive strength.
By Stretching and Pressing the good, it is tested the Adhesion
Degree.
Testing Limit : Weight - 20,000kgf
Low Temp Test Chamber High Temp Test Chamber
[LOW TEMP TEST CHAMBER]
For testing Cold Resistance.
By keeping the Rubber Sample in cold(freeze) storage, it is
tested the Cold Resistance.
Testing Limit : Temperature - 40°
[HIGH TEMP TEST CHAMBER]
For testing Heat Resistance of Rubber Sample.
By Heating the good, it is tested Rubber Sample's Deterioration
degree of Hardness, Tension, Elongation.
Rheo Meter
[RHEO METER]
For testing the Specific Rubber Vulcanizing character.
It is tested before the Vulcanization Process to find out the
Standard Data of so different and various Rubbers.
Testing Limit : Temperature - 200°
Rubber Viscometer
[RUBBER VISCOMETER]
For Measuring the Specific Pattern of Rubber itself.
Testing Limit : Temperature - 200°
Inspection Projector
[INSPECTION PROJECTOR]
For Measuring item's size precisely, it is inspected precisely
through the Magnifying Shadow.
Testing Limit : Diameter - φ400mm
Unit - 1/1000mm